Skip to content

TCEPro — Virtual dyno

Where: TCEPro Web, Cabinet → Virtual dyno
Status: beta, included with an active TCEPro license

The virtual dyno tests a firmware image on a model of the car: a power and torque pull on a working gear and a standing-start acceleration run, with a dyno-style report. It runs on the TCEPro Web server, not in the desktop program. The figures are an estimate on a model of the car and do not replace a real dyno (§8.1).

  1. 1. Introduction

    • 1.1. What it simulates
    • 1.2. Who can use it
    • 1.3. Supported vehicles

  2. 2. Preparing the image

    • 2.1. File requirements
    • 2.2. Checksums
    • 2.3. Stock and tuned images

  3. 3. Running a test

    • 3.1. Starting a test
    • 3.2. Automatic checks
    • 3.3. Queue and progress
    • 3.4. Cancelling a test
    • 3.5. Tests at a time

  4. 4. The tests

    • 4.1. Power and torque pull
    • 4.2. Standing-start acceleration
    • 4.3. Test conditions

  5. 5. Reading the report

    • 5.1. Summary
    • 5.2. Curves and acceleration
    • 5.3. Temperatures and component loads
    • 5.4. Hardware estimate
    • 5.5. ECU faults
    • 5.6. Notes and downloads

  6. 6. When a test does not run

    • 6.1. Rejected images
    • 6.2. Tests that did not finish

  7. 7. Your files and the public log

    • 7.1. Your files
    • 7.2. The public log
    • 7.3. Deleting a test

  8. 8. Limits of the method

    • 8.1. An estimate, not a measurement
    • 8.2. Comparing reports

Updated November 14, 2026 · for TCEPro 0.54.1